Band 2 Meteor Scatter:
104.9 0332 I Radio 105 Network, Ancona/Forte Montagnolo-Via Ghettarelo (an)
5211 ____5___ 1435km **
107.7 0332 I Radio Maria, Ancona/Località Paterno-Via del Cimitero (an) 51CC 1434km **
100.4 0436 ? UNID, ? US accented OM
100.8 0436 E Onda Cero, Toledo (CAM-TO) E888 ONDACERO 1510km **
104.7 0436 I Radio Antenna Uno (Torino), Moncalieri/Strada esterna vetta del Colle
della Maddalena (to) Presumed. 5BF7 ANTE____. PI oddities with this. Radio Antenna Uno is listed with PI 5B67 1050km **
100.2 0539 I UNID, ? 5B5B
101.7 0539 I Radio Sportiva, Multi-tx 5244 **
103.9 0539 I Radiocity, Montacuto/Monte Giarolo (al) 5B78 1134km **
100.0 0546 I Radio Subasio, Cetona/Monte Cetona (si) Pops, as 103.5 (53FD) 1422km **
101.7 0546 I Radio Subasio, San Venanzo or San Marcello Pistoies Pops,
as 103.7 (53FD) **
104.1 0546 I Radio Subasio, Bagno a Ripoli or Vaiano Pops, as 103.7 (53FD) **
** Personal 'First'
"All new" today. "The No Repeat DX Report"!! ;O)
I got the audio working into CamStudio today. I simply deselected the RealTek soundcard in VRX5 (FDM-S2's settings) and, for some odd reason, this opened up the path between my Delta 66 and CamStudio. I know, that doesn't make any sense at all, but I'm not complaining. There must have been a conflict. I'm sure this will be broken again tomorrow.
Two videos from today (with audio!!!):
103.9 I Radiocity, Montacuto
http://youtu.be/a9tB6DAhOlE
100.8 E Ondacero, Toledo
http://youtu.be/gylgIYRU7Lo
Back to horizontal again overnight!
Good DX!
John Faulkner
Skegness, Lincolnshire (JO03dd) <3m ASL.
Blog: http://skegnessdx.blogspot.co.uk
YouTube Channel: https://www.youtube.com/user/g1vvp
Vimeo Channel: https://vimeo.com/skegnessdx
Receiver:
Elad FDM-S2
Aerials:
Körner 9.2 @ 5.5 metres agl. QTH is 3 metres asl.
Triax FM3, one metre above the ground as a phasing antenna.
Fringe Electronics 20dB & Labgear 30dB band 2 pre-amps.
HS Publications Antenna Phaser.
Software: Elad FDM-SW2 & RDS Spy via VAC.
Rotator:
Yaesu G-5500 azimuth & elevation rotator, allowing antenna to be vertical, horizontal, etc.
No comments:
Post a Comment